Resources

Glossary

74 inspection, measurement and machine vision terms, defined in plain language.

Inspection Systems10 terms

SPI (Solder Paste Inspection)
Automated measurement of solder paste deposits after printing and before component placement.
3D SPI
Solder paste inspection that measures height and volume as well as area and position.
2D SPI
Solder paste inspection from a flat image; measures area and position but not height.
AOI (Automated Optical Inspection)
Camera-based inspection of an assembly for visible defects such as missing, misplaced or reversed components and faulty solder joints.
3D AOI
AOI that adds height data to the image, allowing component height, coplanarity and fillet shape to be measured.
AXI (Automated X-ray Inspection)
X-ray inspection used for joints hidden from view, such as those under BGAs.
Benchtop system
An inspection or measurement system used beside the line, loaded by an operator.
Fully automatic system
A system that inspects a whole board under program control without operator positioning.
Inline inspection
Inspection performed by a machine in the conveyor line, on boards as they pass.
Offline inspection
Inspection performed away from the conveyor line, typically on sampled boards.

Manufacturing Process10 terms

SMT (Surface-Mount Technology)
Assembly method in which components are soldered to pads on the surface of the board.
PCB (Printed Circuit Board)
The bare board that carries the copper circuit and pads.
Solder paste
A mixture of solder powder and flux that is printed onto pads and melted in reflow to form joints.
Stencil printing
Depositing solder paste through apertures in a metal stencil using a squeegee.
Aperture
An opening in the stencil through which paste is printed onto one pad.
Area ratio
Aperture opening area divided by aperture wall area. Low values, commonly below about 0.66, release paste poorly.
Transfer efficiency
The volume of paste actually deposited as a percentage of the aperture volume.
Pick and place
The machine that places components onto the printed paste.
Reflow soldering
Heating the assembly through a controlled profile so the paste melts and forms solder joints.
Rework
Correcting a defective assembly after it has been soldered.

Defects9 terms

Insufficient solder
Too little paste or solder to form a reliable joint.
Bridging
Paste or solder connecting two pads or leads that should be separate.
Open
A joint with no electrical connection between lead and pad.
Tombstoning
A two-terminal component standing on one end after reflow, often caused by unequal paste volume or offset.
Solder balls
Small spheres of solder left on the board away from the joint.
Component shift
A component displaced or rotated from its intended position.
Lifted lead
A component lead that is not in contact with its pad or solder.
Head-in-pillow
A BGA defect in which the ball rests on the paste deposit without merging with it.
Voiding
Gas pockets trapped inside a solder joint.

Measurement & Quality16 terms

Paste height
Height of a paste deposit above the pad or board reference plane.
Paste volume
The amount of paste in a deposit, the measurement most closely related to solder joint quality.
Offset
Displacement of a paste deposit or component from its intended position.
Coplanarity
The degree to which leads or balls of a component lie in one plane.
Warpage
Deviation of a board or component from flat.
Fiducial
A reference mark on the board used by machines to locate it accurately.
Resolution
The smallest change a system can distinguish. Not the same as accuracy.
Repeatability
How closely repeated measurements of the same feature agree.
GR&R (Gauge Repeatability and Reproducibility)
A study of how much measurement variation comes from the gauge and its operators, expressed as a percentage of tolerance.
SPC (Statistical Process Control)
Using charts of measured data to detect when a process changes.
Control limits
Statistical limits showing the normal range of a stable process; distinct from specification limits.
Cp and Cpk
Process capability indices comparing process spread, and centering, with the specification.
First-pass yield (FPY)
The percentage of units that pass without rework.
DPMO / PPM
Defects per million opportunities, or parts per million defective.
False call
A good part reported as defective by an inspection system.
Escape
A defective part passed as good by an inspection system.

Vision Technology14 terms

Machine vision
The use of cameras and image analysis for automatic inspection, measurement, identification and guidance.
Computer vision
The broader field of extracting information from images and video by computer.
Structured light
A 3D measurement method that projects a known pattern onto a surface and computes height from its distortion.
Phase shifting
Capturing several images of a stepped sinusoidal pattern to compute height with sub-pixel precision.
Laser triangulation
A 3D method that computes height from the displacement of a projected laser line or spot.
Stereo vision
Computing depth from two cameras viewing the same scene from different positions.
Height map
An image in which each pixel value is a height.
Point cloud
A set of 3D points representing a measured surface.
Field of view (FOV)
The area seen by the camera in one image.
Vision AI
Machine learning, particularly deep learning, applied to image analysis tasks.
Deep learning
Machine learning using multi-layer neural networks trained on examples.
Anomaly detection
Training a model on good parts only so that anything different is flagged.
Synthetic data
Artificially generated images used to train models when real examples are scarce.
Embedded vision
Vision processing running on a compact, dedicated platform such as an FPGA or edge GPU.

Standards8 terms

IPC-A-610
Acceptability of Electronic Assemblies; the workmanship standard for finished assemblies.
IPC Class 1, 2, 3
Product classes of increasing reliability requirement: general, dedicated service and high performance.
J-STD-001
Requirements for soldered electrical and electronic assemblies; covers materials and processes.
IPC-7525
Stencil design guidelines.
IPC-7527
Requirements for solder paste printing.
ISO 13485
Quality management system standard for medical devices.
AS9100
Quality management system standard for aerospace.
IATF 16949
Quality management system standard for the automotive supply chain.

Business Terms7 terms

ROI (Return on Investment)
Net benefit of an investment divided by its cost.
Payback period
The time for savings to equal the investment.
TCO (Total Cost of Ownership)
Purchase price plus all costs of running a system over its life.
10x rule
Rule of thumb that the cost of a defect rises about tenfold at each later stage where it is found.
OEM (Original Equipment Manufacturer)
The company that designs and builds a product.
Private label
A product made by one company and sold under another company’s brand.
Traceability
The ability to link each unit to the data recorded while it was made.

Need More Than a Definition?

Our articles explain how these ideas apply on a real line.