Resources

Articles and Guides

Why inspect, how to justify it, how to choose a system and how to get the most from it. Written by the people who design and build the equipment.

Business6 min read

Why Inspect? The Case for Automated Inspection in SMT Assembly

Final test tells you a board is bad. Inspection tells you why, and early enough to do something about it. Here is the plain case for inspecting in process.

Read article
Business7 min read

Solder Paste Measurement Justification: Building the ROI Case for SPI

A step-by-step way to build a credible business case for solder paste inspection using your own yield, rework and scrap numbers.

Read article
Business6 min read

The True Cost of Rework and the 10x Rule

Rework looks like a labor line on a cost report. The real cost is several times larger, and most of it is hidden. Here is where it goes.

Read article
Buyer's Guide7 min read

SPI Buyer's Guide: Questions to Ask Before You Buy

A practical checklist for evaluating solder paste inspection systems: measurement performance, usability, total cost and, above all, who stands behind the machine.

Read article
Buyer's Guide6 min read

Original Manufacturer, Private Label or Pre-Owned: Who Stands Behind Your Inspection System?

Inspection equipment reaches the market by three routes. Each has a place. Understanding which one you are being offered changes the questions you should ask.

Read article
Technology5 min read

3D vs 2D Solder Paste Inspection: Why Height Matters

A 2D system sees where the paste is. A 3D system measures how much there is. That difference decides which defects you catch.

Read article
Buyer's Guide5 min read

Benchtop vs Fully Automatic SPI: Which Fits Your Line?

Both measure paste in 3D. They differ in coverage, labor and price. A guide to choosing the right class of system for your volume and product mix.

Read article
Technology6 min read

How Structured-Light 3D Measurement Works

A plain-language explanation of how projecting a light pattern onto a surface produces a height map accurate to a micron.

Read article
Best Practices7 min read

Setting Paste Height and Volume Control Limits: SPC, Cpk and GR&R

How to turn paste measurements into process control: choosing limits, checking your gauge and reading the charts.

Read article
Standards5 min read

IPC-A-610 Class 2 vs Class 3: What It Means for Inspection

The IPC product classes set how good an assembly has to be. A short guide to the classes and how they shape an inspection strategy.

Read article
Technology6 min read

AOI Basics: What It Catches and Where It Belongs in the Line

An introduction to automated optical inspection: how it works, what it finds, what it cannot see, and how to place it.

Read article
Best Practices6 min read

Reducing False Calls Without Missing Real Defects

False calls erode trust in an inspection system. Here is where they come from and how to bring them down without opening the door to escapes.

Read article
Machine Vision6 min read

Vision AI in Inspection: What Works and What Is Hype

Machine learning has real uses in inspection and real limits. A practical view from a company that builds both the measurement and the AI.

Read article
Machine Vision6 min read

Beyond the PCB: Machine Vision Inspection for General Manufacturing

The methods that inspect circuit boards apply to almost anything made in volume. A guide to what machine vision can do on your line and how to scope a first project.

Read article
Machine Vision6 min read

Build vs Buy: When a Custom Vision System Makes Sense

Standard vision products are quick and economical when they fit. A guide to recognizing when they do not, and what a custom development involves.

Read article

Put Numbers on It

Use your own volumes, defect rates and costs to estimate what inspection would save.