Tools
Inspection ROI Calculator
Enter your own production figures to estimate what inspection would save in scrap and rework, and how quickly it would pay for itself.
Your production
The starting values are examples. Replace them with your own.
Expected improvement
These are your assumptions, not a promise. Try a conservative case as well as an expected one.
Investment
Enter the total from your quotation, including installation and training, to see payback and return. Request a quote
Estimated net annual savings
$138,750
Payback
—
5-year ROI
—
Enter your system investment to see payback and ROI.
Breakdown
Scrap savings per year$45,000
Rework savings per year$93,750
Less annual operating cost-$0
Net annual savings$138,750
How it is calculated
- Scrap savings = boards × defect rate × defect reduction × share scrapped × board value
- Rework savings = boards × rework rate × rework reduction × rework cost per board
- Net annual savings = scrap savings + rework savings − annual operating cost
- Payback = investment ÷ net annual savings × 12 months
- Five-year ROI = (5 × net annual savings − investment) ÷ investment
What to keep in mind
- This is an estimate. Actual results depend on your products, your process and how the inspection data is used.
- The improvement percentages are your own assumptions. Inspection only reduces defects that originate at the step being inspected.
- Not included, so the estimate is on the cautious side: warranty and field-failure costs, manual inspection labor, schedule and capacity gains, and customer retention.
- Savings are not discounted and are assumed constant over five years.
Want a Model Built Around Your Line?
Send us your figures and we will prepare a custom ROI analysis, including the factors this calculator leaves out.