Automated Optical Inspection

Automated Optical Inspection, Engineered for Your Product

Custom-engineered optical inspection systems that check presence, position, polarity and solder quality, built by the team that designs our 3D sensors and vision software.

Automated optical inspection uses cameras, controlled lighting and software to check assemblies for defects that people miss when they inspect thousands of parts a day: missing or wrong components, reversed polarity, shifted parts, lifted leads, solder bridges and insufficient joints.

Catalog AOI machines are built for the average board. Many products are not average: unusual component mixes, odd-form parts, conformal coating, mixed-technology assemblies, or defects that are specific to one process. For those cases a system designed around the product does a better job than a general machine tuned as far as it will go.

VisionMaster engineers AOI systems to order. We design the optics, lighting and motion, and write the inspection software, using the same 2D and 3D imaging and Vision AI technology that goes into our own inspection products.

Capabilities

What AOI can check

Presence and absence

Missing, extra or wrong components, including odd-form and through-hole parts.

Position and rotation

Component shift, skew and tombstoning against placement tolerances.

Polarity and marking

Orientation marks, text and codes read and verified against the bill of materials.

Solder quality

Bridges, insufficient and excess solder, and lifted leads, using 2D imaging, 3D height data or both.

Coating, glue and labels

Coverage, placement and continuity of conformal coating, adhesive beads and labels.

Traceability

Serial numbers and results recorded per unit for audits and customer reporting.

How It Works

How a custom AOI project runs

01

Defect review

We look at your product, your defect history and your line, and agree what must be detected and at what rate.

02

Feasibility study

We image your real good and bad samples with candidate optics and lighting, and report what is detectable before you commit to a build.

03

System design and build

Mechanical, optical and software design, followed by build and test in our own facility.

04

Deployment and support

Installation, operator training and ongoing support from the engineers who built it.

Systems

Built to Order

AOI systems are built to order. If your need is specifically solder paste measurement, see our standard SPI systems.

Frequently Asked Questions

What is automated optical inspection (AOI)?

AOI is camera-based inspection of an assembly for visible defects such as missing, misplaced or reversed components and faulty solder joints. In electronics it is most often used after placement or after reflow.

Does VisionMaster sell a standard AOI machine?

Our standard products are 3D solder paste inspection and measurement systems. AOI and general inspection systems are engineered to order around the customer’s product and defect requirements.

What is the difference between SPI and AOI?

SPI measures solder paste deposits in 3D straight after printing. AOI checks components and solder joints after placement or reflow. They address different stages of the line and are complementary.

When does a custom AOI system make sense?

When a catalog machine cannot reliably see your defects, cannot handle your part, produces too many false calls, or when inspection has to be built into an existing machine or process.

Discuss Your Application

Send us a description of the part and what you need to detect or measure. An engineer will reply, not a sales script.